SCA-7FNHD

Print This Product
Email to Friend
Silicon carbide # 7 sandblasting nozzle. fine threads.
SCA-7FNHD
Description

Silicon Carbide # 7 sandblasting nozzle 1" entry with 1-1/4" threads.  Tuff Impact resistant design.

Our Silicon carbide nozzles are light weight, with an ergonomic grip style impact resistant jacket system. Silicon carbide Nozzles offer a longer work life than equivalent tungsten carbide nozzles. For even longer work life, look at our EVBC-7 boron carbide nozzle. 

Specs:

Part Number: SCA-7FNHD

Sku: 794005

Length: 8"

Bore: 7/16"

Entry: 1"

Threads: 1-1/4" NPSM

Liner: Silicon Carbide

Jacket: Engineering grade Thermoplastic incorporating enhanced impact resistance. 

Washer: NW-1514 

Guide on estimated nozzle service life in hours.

Nozzle Liner Material

Steel shot/Grit / approx. Hours

Expendable Abrasives /approx. Hours

Aluminum Oxide/ approx Hours

Silicon Carbide 600 -1000 400 - 600 50 -100
All figures are indicative and given for liner material life comparison purposes only.  Actual service life will depend on operational variable such as: blast pressure, media dimensions & media particle profile. All figures are approximate. Nozzle is considered worn whan bore is approximately 1/16" larger than when new.

 

Air and power requirements for a 7/16" bore nozzle at different nozzle pressures. All figures are approximate and given for guidance purposes only.
Bore 7/16 : 9.50 mm
PSI -50 PSI-60 PSI-70 PSI-80 PSI-90 PSI-100 PSI-125
Air (CFM) 147 170 200 217 240 254 314
Abrasive/LBS/hr 900 1000 1200 1312 1400 1550 1800
Horsepower 33 38 43.5 48.5 53.5 56.5 69