SCA-8FNHD
Description
Silicon Carbide sandblasting nozzle 1" entry, 1/2" Bore. Heavy duty design with impact resistant thermoplatic jacket & 1-1/4" threads.
Silicon carbide nozzles are light weight and offer a longer work life than equivalent tungsten carbide nozzles. For even longer life look at our EVBC-8 boron carbide nozzle.
Model: SCA-8FNHD Uses washer NW-1514
Specs:
Part Number: SCA-8FNHD
Sku: 794006
Length: 9"
Bore: 1/2"
Entry: 1"
Threads: 1-1/4" NPSM
Liner: Silicon Carbide
Construction: Thermoplastic
| Guide on estimated nozzle service life in hours. | |||
|
Nozzle Liner Material |
Steel shot/Grit / approx. Hours |
Expendable Abrasives /approx. Hours |
Aluminum Oxide /approx hours |
| Silicon Carbide | 600 -1000 | 400 - 600 | 50-100 hours |
| Air and power requirements for a 1/2" bore nozzle at different nozzle pressures. All figures are approximate and given for guidance purposes only. | |||||||
| Bore 1/2 : 12.75 mm |
PSI -50 | PSI-60 | PSI-70 | PSI-80 | PSI-90 | PSI-100 | PSI-125 |
| Air (CFM) | 200 | 224 | 252 | 280 | 309 | 338 | 430 |
| Abrasive/LBS/hr | 1200 | 1336 | 1500 | 1700 | 1856 | 2024 | 2525 |